Retrofit Kits for Manual, Milling machine, Grinders and Lathes
Acu-Rite and Heidenhain offer a full range of Retrofit kits for All make of Milling , grinding or turning machine. Scales run 2” to 120’ X,Y and Z axis all accuracies with many detailed kits for different manufactures. Including, Bridgeport I & II , Alligent, Sharp, Clausing, Hardinge, Atlas, jet, Kent, Lilian.
Call today for you cost on Retrokits Starting At
$1,500.00 !
Acu-Rite, offers the SENC 50 and 150 sealed liner encoders on their Retrofits.
The compact and robust design, and the numerous possibilities for mounting, make it ideal for retrofitting. The slight dimensions and high accuracies of this ball-bearing guided encoder, which uses the reflected light method, are ideal prerequisites that can be used in metrology applications.
As the result of its extremely compact dimensions, the SENC 50 linear encoder is perfect for many different types of applications and situations. It is especially suitable if the installation space is limited or otherwise restricted.
- Robust design
- Resolutions from 0.5 µm,1.0 um and 5.0 µm
- Output signals: TTL
- Measuring lengths from 75 mm/2” to 3075 mm/120”
- Distance-coded reference marks
Please contact us to assist you in finding the correct retrofit for you (978) 887-3389
ACU-RITE’s models DRO100/203/300 all support many new innovative software features, including an “Installation Guide” that appears at first-time power up that all DRO users will appreciate. Another exciting new feature is “Dynamic Zoom”, where once activated, the display values for the axis currently being moved are maximally enlarged. The user can immediately see which axis is currently in motion and can also easily read the numerical value from a greater distance.
Other new software features common to all include:
- File management
Users can save and/or load firmware, configuration files, graphic files and instruction manuals. - User management
In the DRO203/300, a simple user management system has been introduced in order to make it easier for multiple users to operate the unit. Up to nine users can store their personal settings with a user number and then call them at will. It is not necessary to enter a password. The machine setter can reset all the users. - Day and night switchover
The main screen can be switched to a brighter or a darker background depending on the lighting conditions at the machine. - Highlighted display
As a simple means of graphically highlighting the axis currently in motion, the display value of the axes not being moved can be dimmed.
On the hardware side, a 7-inch TFT color display that significantly optimizes the readability (brightness, color, resolution, and the viewing angle) of the information displayed is now being used. And each readout is housed with a robust powder-coated, die-cast aluminum housing.
The DRO100 uses a membrane keyboard. The mid-range DRO203 and high-end DRO300 provide a rubber keypad.
Encoders with a TTL interface (differential and single-ended) can be connected via a 9-pin D-sub connector. The power supply is built-in. All the new units feature a VESA MIS 100 interface on the back that allows for mounting with standardized brackets. Data interface can be done through USB Type-
PLEASE CONTACT US FOR A DETAILED QUOTATION
DRO 1OO,2O3,300 INFO
SENCE 150 AND SENC 50 SCALE INFO
