• Skip to main content
(978) 887-3389
gevanwert@aol.com
GWlogo2
  • Home
  • ABOUT
  • CONTACT
  • Heidenhain Sales
    • Sealed Linear Scales
    • Exposed Linear Encoders
    • Digital Length Guages
    • Rotary & Angle Encoders
    • Digital Readouts
    • Calibration Equipment
  • Heidenhain Service
    • In House Service
    • On Site Services
    • MACHINE DOWN
    • Heidenhain Replacement Part and Service Exchange
    • Calibration Services
  • Retrofits
    • MX200 METLOGIX RETROFIT DRO
    • LS Starrett
    • Dorsey
    • J & L Retrofit:
    • Mitutoyo
    • Optical Comparator, Tool Maker Microscopes, Manual Vision Systems
    • Deltronics
    • ST , CCP
    • Bridgeport Retrokit, Lathes , Grinders CNC
    • MILPWR G2  CNC Retrofit
  • Optical Comparators
    • Dorsey Metrology
    • J&L
    • Nikon
    • Refurbished Comparators
  • Manual Vision Systems
    • Scienscope
    • Nikon TMM
    • Acu-Gage
    • Baty Gage Master
  • Automatic Vision Systems
    • NIKON INEXIV VMA SERIES
    • NIKON NEXIV VMZ-R SERIES
    • APDIS MV430 Laser Radar
    • HANDHELD CMM ARM : MODEL MAKER H120 MCAXS
  • EDMUNDS GAGES
    • EDMUNDS : OD / ID AIR GAUGING
    • EDMUNDS GAGES: ACCU-TOUCH DRO
    • EDMUNDS GAGES: CAG-INPROCESS GAUGING
    • EDMUNDS GAGES: DESIGN AND BUILD
  • JENOPTIK
    • JENOPTIK: W800, W900 SURFACE CONTOUR AND ROUGHNESS
    • JENOPTIK: OPTICLINE CS AUTOMATED SHAFT INSPECTION
    • JENOPTIK: IPS 100 ID AUTOMATED VISUAL FLAW DETECTION
    • JENOPTIK: AUTOMATED IN-PROCESS DESIGN AND BUILD

Optical Comparator, Tool Maker Microscopes, Manual Vision Systems

Optical Comparator, Tool Maker Microscopes, Manual Vision Systems

  • Metlogix: Digital Readout
  • LS Starrett
  • Dorsey
  • J&L
  • Mitutoyo
  • Nikon
  • Deltronics
  • ST Industries
  • Bridgeport Retrokit, Lathes , Grinders CNC
  • MILPWR G2  CNC Retrofit
Screen Shot 2021-02-18 at 9.32.30 PM

Type 1 : OLD Starrett machine HB400, HB350, HE400, HB800 ETC…
Has 2x 9-pin Heidenhain round 11uA encoders, 1xTTL  9-pin Dsub for Rotary Axis to retrofit:

Screen Shot 2021-02-18 at 9.39.24 PM

You Will need Retrokit # MX2X-UAXY-AM:
MX200 DRO with Heidenhain 11UuA (9pin) XY scales with Arm Mount
(2 ADAPTER CABLES INCLUDED)

Option: Replace MX2 with MX1 simple DRO
Option: Add -0E for optical edge detection
Option: Replace –AM for –DM for desk mount stand (Arm Mount included)
Option: Add –Q for rotary axis.

NOTE: WE ALSO OFFER XY SCALE REPLACEMENTS !

PLEASE CONTACT US FOR A FORMAL QUOTATION

CLICK HERE TO DOWN LOAD SELECTION GUIDE

Screen Shot 2021-02-18 at 9.42.18 PM
Screen Shot 2021-02-18 at 9.56.33 PM

Type 2 : Newer Starrett machine HB400, HB350, HE400, HB800 ETC…
Has 2x Heidenhain 15-pin Dsub, 1vpp,& 9-pin Dsub for the Rotary Axis.

Screen Shot 2021-02-18 at 10.00.02 PM

You Will need Retrokit # MX2-1vXY-AM:
MX200 DRO with Heidenhain 1vpp (15pin) XY scales with Arm Mount

Option: Replace MX2 with MX1  simple DRO
Option: Add -0E for optical edge detection
Option: Replace –AM for –DM for desk mount stand (Arm Mount included)
Option: Add –Q  for rotary axis.

NOTE: WE ALSO OFFER XY SCALE REPLACEMENTS !

PLEASE CONTACT US FOR A FORMAL QUOTATION

CLICK HERE TO DOWN LOAD SELECTION GUIDE

Screen Shot 2021-02-18 at 9.54.48 PM
Screen Shot 2021-02-21 at 8.59.32 PM

Dorsey machines: 16H, 16HE,14H, 24P ETC…
Has 2x Heidenhain 15-pin D sub, 1vpp,& 9-pin Dsub for the Rotary Axis.

Screen Shot 2021-02-18 at 10.00.02 PM

You Will need Retrokit # MX2-1vXY-AM:
MX200 DRO with Heidenhain 1vpp (15pin) XY scales with Arm Mount

Option: Replace MX2 with MX1  simple DRO
Option: Add -0E for optical edge detection
Option: Replace –AM for –DM for desk mount stand (Arm Mount included)
Option: Add –Q  for rotary axis.

NOTE: WE ALSO OFFER XY SCALE REPLACEMENTS !

PLEASE CONTACT US FOR A FORMAL QUOTATION

CLICK HERE TO DOWN LOAD SELECTION GUIDE

dorseyOptical
Screen Shot 2021-02-21 at 9.07.45 PM

The Jones and Lampson Optical compartor . EPIC 30. PC 14 , Classic 14 ETC…
Has 2x Acu-rite TTL Bendix Round connector,& 9-pin TTL Dsub for the Rotary Axis.

Screen Shot 2021-02-21 at 9.11.40 PM

You will need Retrokit # MX2-ARXY-AM:
MX200 DRO with Bendix (6pin) XY scales with Arm Mount
(Jumpers included)

Screen Shot 2021-02-21 at 9.13.02 PM

Newer J&L You Will need Retrokit # MX2X-XY-AM:
MX200 DRO with Acur-ite TTL (9pin) XY scales with Arm Mount
(No jumpers needed)

Option: Replace MX2 with MX1 simple DRO
Option: Add -0E for Optical Edge Detection
Option: Replace –AM for –DM for desk mount stand (Arm Mount included)
Option: Add –Q for rotary axis.

NOTE: WE ALSO OFFER XY SCALE REPLACEMENTS !

PLEASE CONTACT US IF YOU DO NOT SEE YOU CONNECTION

PLEASE CONTACT US FOR A FORMAL QUOTATION

CLICK HERE TO DOWN LOAD SELECTION GUIDE

JLOpt
Screen Shot 2021-02-21 at 9.16.45 PM

The Mitutoyo Optical Compartors . PH 14, PH 3500 ETC…
Has 2x Mitutoyo 2Vpp, 15 pin connectors XY

Screen Shot 2021-02-21 at 9.18.21 PM

You will need Retrokit # MX2-MTXY-AM:
MX200 DRO with Mitutoyo 15 pin XY scales with Arm Mount

Note: older Units with 7pin round connector will need
XY scale up grades.

Option: Replace MX2 with MX1 simple DRO
Option: Add -0E for Optical Edge Detection
Option: Replace –AM for –DM for desk mount stand (Arm Mount included)
Option: Add –Q for rotary axis.

NOTE: WE ALSO OFFER XY SCALE REPLACEMENTS !

PLEASE CONTACT US IF YOU DO NOT SEE YOU CONNECTION

PLEASE CONTACT US FOR A FORMAL QUOTATION

CLICK HERE TO DOWN LOAD SELECTION GUIDE

Screen Shot 2021-02-21 at 9.21.28 PM
Screen Shot 2021-02-21 at 9.27.24 PM

The Deltronics Optical Compartors
Has 2x ,RSF/TTL , 7 pin round connectors XY

Screen Shot 2021-02-21 at 9.27.09 PM

You will need Retrokit # MX2-DTXY-AM:
MX200 DRO with Mitutoyo 15 pin XY scales with Arm Mount
(Jumpers included)

Option: Replace MX2 with MX1 simple DRO
Option: Add -0E for Optical Edge Detection
Option: Replace –AM for –DM for desk mount stand (Arm Mount included)
Option: Add –Q for rotary axis.

NOTE: WE ALSO OFFER XY SCALE REPLACEMENTS !

PLEASE CONTACT US IF YOU DO NOT SEE YOU CONNECTION

PLEASE CONTACT US FOR A FORMAL QUOTATION

CLICK HERE TO DOWN LOAD SELECTION GUIDE

Deltroinc Dro with MX200 Retrofit option
Screen Shot 2021-02-21 at 9.36.55 PM

NIkon: Older TMM and Optical comparator have few stages that will require some additional cables:

Screen Shot 2021-02-21 at 9.37.06 PM

You will need Retrokit # MX2-DTXY-AM:
MX200 DRO with Mitutoyo 15 pin XY scales with Arm Mount
You will need ADAPTER CABLES  Nikon #  PAX202-19 (2 or 3 needed)

3 Axis TMM # MX2-DTXYZ-AM (3AXIS WITH ARM MOUNT)

NEWER STAGES DO NOT REQUIRE ADDITIONAL CABLES

PLEASE CONTACT  US FOR PROPER PRICING

Option: Replace MX2 with MX1 simple DRO
Option: Add -0E for Optical Edge Detection
Option: Replace –AM for –DM for desk mount stand (Arm Mount included)
Option: Add –Q for rotary axis.

NOTE: WE ALSO OFFER XY SCALE REPLACEMENTS !

PLEASE CONTACT US IF YOU DO NOT SEE YOU CONNECTION

PLEASE CONTACT US FOR A FORMAL QUOTATION

CLICK HERE TO DOWN LOAD SELECTION GUIDE

Screen Shot 2021-02-21 at 9.36.34 PM
Screen Shot 2021-02-21 at 9.41.51 PM

The ST Optical Compartor :

Has 2 Acu-rite Round connector,6-pin

Screen Shot 2021-02-21 at 9.43.47 PM

You will need Retrokit # MX2-ARXY-AM:
MX200 DRO with Bendix (6pin) XY scales with Arm Mount
(Jumpers included)

Screen Shot 2021-02-21 at 9.44.26 PM

Newer ST Models You will need Retrokit # MX2X-XY-AM:
MX200 DRO with Acur-ite TTL (9pin) XY scales with Arm Mount
(No jumpers needed)

Option: Replace MX2 with MX1 simple DRO
Option: Add -0E for Optical Edge Detection
Option: Replace –AM for –DM for desk mount stand (Arm Mount included)
Option: Add –Q for rotary axis.

NOTE: WE ALSO OFFER XY SCALE REPLACEMENTS !

PLEASE CONTACT US IF YOU DO NOT SEE YOU CONNECTION

PLEASE CONTACT US FOR A FORMAL QUOTATION

CLICK HERE TO DOWN LOAD SELECTION GUIDE

Screen Shot 2021-02-21 at 9.42.49 PM

Get In Touch!

(978) 887-3389

461 Boston Street, Suite B4 Topsfield, MA 01983

gevanwert@aol.com

© 2021 GE Van Wert. All Rights Reserved.